T-Fal Deep Fryer - Manual (Page 6)

6
Using the Oil box container control lever
The Oil box control lever has 3 positions.
Fry Position: to fry.
Automatic Oil Filtration Position: to drain and filter the oil into the oil box.
Oil box Position: to allow for removal of the oil box container.
Before first use
• The fryer can be completely dismantled.
Remove the lid. Remove the frying basket, control unit and bowl. Remove the oil box by positioning
the Oil box control lever on the Oil box position.
• Clean the lid, the bowl, the housing, the frying basket and the Oil box with soap and water or put them in
the dishwasher.
• Clean the control unit and the heating element with a damp cloth.
• Dry thoroughly.
• After cleaning, press on the red button under the fryer to release any water in the bowl.
NOTE: Do not immerse the control unit with the heating element in water.
Check that the red button has gone back to its original position.
USING YOUR FRYER
OK
CLIC
K
CLIC
K
• Place the bowl and the heating element in position.
• Place the Oil box control lever on the Oil box position and insert the empty Oil box into the fryer.
• Completely unfold the basket handle; a “click” indicates that it is correctly positioned.
NOTE: Make sure that the control unit is correctly positioned otherwise the fryer cannot function.