Т³гж 10, Time settings, Time settings 18 – Technika LCD32-407B User Manual

Page 10: Signal source settings

Advertising

SLEEP TIMER
1.Press MENU button for the main menu display.
2.Press button to select TIMER menu, press
button to enter.
3.Press button to select SLEEP TIMER item.
4.Press button to select the sleep timer you
need. You can select OFF, 15,30, ......, 240. After
setting, press MENU button to save and exit, the
TV will start counting.
Note: You can press SLEEP button on the remote
controller to set the sleep timer you need.

CLOCK
1.Press MENU button for the main menu display.
2.Press button to select TIMER menu, press
button to enter.
3.Press button to select CLOCK item, press
button to enter setting. Press button
to select hour or minute position, press button
to adjust the value. After setting, press MENU button
to save and exit.

OFF TIME
1.Press MENU button for the main menu display.
2.Press button to select TIMER menu, press
button to enter.
3.Press button to select OFF TIME item, press
button to enter setting. Press button
to select hour or minute position, press button
to adjust the value. After setting, press MENU button
to save and exit. When the off time has arrived, the TV
set will enter standby status.

REMIND TIME
1.Press MENU button for the main menu display.
2.Press button to select TIMER menu, press
button to enter.
3.Press button to select REMIND TIME item, press
button to enter setting. Press button
to select hour or minute position, press button
to adjust the value. After setting, press MENU button
to save and exit.
Note: Functions only work when clock is set.

TIME SETTINGS

REMIND PROGRAM
1.Press MENU button for the main menu display.
2.Press button to select TIMER menu, press
button to enter.
3.Press button to select REMIND PROG.
item, press button to set the on channel, if
the on channel is off, the on channel is the channel
before standby status.
Note: 1. Function only works when time is set.
2. When the REMIND PROG. and the
PW.CHANNEL in the child lock menu are
set at the same time, the PW.CHANNEL is
prior.

SIGNAL SOURCE SETTINGS

There is different signal source mode in this TV set,
you can select according to your requirement: TV, AV,
S-VIDEO1, S-VIDEO2, YPbPr, PC,

1, HDMI2

ress SOURCE button on the remote control to

You can also press SOURCE button on the remote

control to select the signal source directly.

SCART1, SCART2,

HDMI

or DTV.

1.P

make

the signal source menu display
2.Press

button to select the signal source you

need. Press button to enter.

Note:

TV
AV
S-VIDEO1
S-VIDEO2
YPbPr
PC
SCART1
SCART2
HDMI1
HDMI2
DTV

TIMER