Tekkeon MP1550 - Manual (Page 7)

5 USER GUIDE
Charging a Device Using an Adapter
1. Select the adapter that fits securely into the power jack on your
portable device and plug it into the input/output cord.
2. Insert the USB plug on the input/output cord into the USB port
on the end of TekCharge.
3. Connect the adapter plug into the power jack on your
portable device.
4. Slide the TekCharge power switch to the ON position to
provide power through the USB port.
5. Turn on the portable device and use it as you would normally. While connected,
TekCharge will power and/or charge your device.
or
Leave the portable device turned off and TekCharge will charge the device battery.
6. When finished, slide the power switch to OFF and unplug the power output cord from TekCharge
and your device.
NOTE: If none of the included adapters fits snugly into your portable device power jack, please go
to our web site at www.tekkeon.com/tcadapters to determine which adapter plug you need for your
device. You can obtain most adapters through the web site, or by contacting Tekkeon by phone at:
1-888-787-5888 or 1-714-832-1266. If available through Tekkeon, the adapter will be sent to you
for a nominal fee.
Charging a device
using an adapter.
MP1550_UG_1107_fnl 12/4/07 10:36 AM Page 5