Error messages and troubleshooting, Possible error messages (main unit) – Toshiba gigabeat MEGF10K User Manual
Page 143
143
Error messages and troubleshooting
Possible Error Messages (Main Unit)
The gigabeat may display the following error messages. Take appropriate action by
referring to the instructions below.
Message
Content and Corrective Action
UNSUPPORTED DATA
The format of the selected data cannot be played on
the gigabeat. Use gigabeat room to transfer the data.
UNABLE TO READ DISK
Reformat the built-in hard disk to the FAT32 format.
Use the gigabeat format.
NO DATA FOUND
Transferring tracks to the gigabeat.
DATA ERROR
The selected data is damaged. Use gigabeat room to
transfer the data.
FAILED TO OPEN
The track could not be opened and played.
Use gigabeat room to transfer the data.
RECHARGE BATTERY
There is insufficient power remaining in the built-in
battery. Connect the AC adapter and charge the
battery.
NO SYSTEM FOUND ON
HDD
The gigabeat cannot be started because the firmware
on the hard disk has been destroyed.
Restore the firmware.