Thermo Products CDB1-125 - Manual (Page 6)

All installations and services must be performed by qualified service personnel.
4
This page contains various warnings and cautions found throughout this manual. Please
read and comply with the statements below.
: IF YOU DO NOT FOLLOW THE SAFETY PRECAUTIONS BELOW AND IN THIS MANUAL, A
FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR LOSS OF
LIFE.
: Property damage, personal injury, or loss of life could result from repair or service of
this furnace by anyone other than a qualified heating contractor. Only the routine maintenance
described in this manual may be performed by the user.
: To avoid injury from moving parts, shut off the power to the furnace before
removing blower compartment door.
: Keep furnace free and clear of combustible materials, gasoline, and other flammable
liquids and vapors.
: Do not use this furnace if any part has been under water. Immediately call a qualified
heating contractor to inspect the furnace and to replace any part of the control system and any gas
control which has been under water.
: If you suspect there is a problem with the furnace, its venting system or any other
related problem, immediately contact a qualified service agency.
: In the event your furnace fails to operate, do not attempt to put the furnace into
operation. Contact a qualified heating contractor to service the furnace.
: A fire or explosion may result causing property damage, personal injury or loss of
life if you do not follow these instructions exactly.
: Homeowners attempting maintenance other than that covered as homeowner/user
maintenance may cause conditions which could result in personal injury or property damage.
: Shut off the power to the furnace before removing blower compartment door to avoid
injury from moving parts.
: This furnace is not to be used for temporary heating of buildings or structures under
construction.
: Call a qualified heating contractor to report suspected deficiencies (Do not attempt to
make repairs yourself!)