Copying video tapes, Speakers others connections, Central speaker – Technicolor - Thomson 72MK89D User Manual

Page 28: Connection to a hi-fi system, Television set, Connections

Advertising
background image

television set

connections

28

PLAY

CALL UP

RECORD

EQUIPMENT SOCKET

PROGRAMME

EQUIPMENT

SOCKET

VHS

Video recorder

Euro-AV 1

AV 1

Video recorder

Euro-AV 2

or

Camcorder

Audio/S-Video AV 2

S-VHS

Video recorder

Euro-AV 2

Camcorder Audio/Video/S-Video

AV

3

Camcorder

Audio/S-Video AV 2

(Right side)

COPYING VIDEO TAPES

It is necessary to have 2 VCRs with the same specifications : 2 VHS/8 mm or 2 S-VHS/Hi-8 mm.

Connect the playback VCR to the Euro-AV1 socket in playback mode.
Connect the recording VCR to the Euro-AV2 socket in recording mode.

During the copying of the tape, you can watch the station you are copying.

or

or

• Direct connection
If preferred, one or two speakers can be connected to replace the loudspeakers on your television set, as shown below :

In this case, the speakers must be placed beneath the television set.

To boost the audio power, you may connect a Hi-Fi system, if you have one.

You must however avoid connecting your Hi-Fi and speakers to similar outputs (e.g. Hi-Fi on the CINCH surround
socket and speakers on the surround clips).

In this case, the configuration of the television set will match that described on page 15.

For a full appreciation of Dolby Surround Pro Logic, your television set should be placed in a spacious room.

Dummy plug to cut the
sound from the second
internal loudspeaker
(if you plug one speaker only)

Unit 1

Unit 2

SPEAKERS CONNECTIONS (OTHER OPTIONS)

CENTRAL SPEAKER

CONNECTION TO A HI-FI SYSTEM

Advertising