Texas Instruments THS4503EVM - Manual (Page 6)

Related Documentation From Texas Instruments
iv
This is an example of a warning statement.
A warning statement describes a situation that could potentially
cause harm to you.
The information in a caution or a warning is provided for your protection.
Please read each caution and warning carefully.
FCC Warning
This equipment is intended for use in a laboratory test environment only. It gen-
erates, uses, and can radiate radio frequency energy and has not been tested
for compliance with the limits of computing devices pursuant to subpart J of
part 15 of FCC rules, which are designed to provide reasonable protection
against radio frequency interference. Operation of this equipment in other en-
vironments may cause interference with radio communications, in which case
the user at his own expense will be required to take whatever measures may
be required to correct this interference.
Electrostatic Sensitive Components
This EVM contains components that can potentially be damaged by
electrostatic discharge. Always transport and store the EVM in its
supplied ESD bag when not in use. Handle using an antistatic
wristband. Operate on an antistatic work surface. For more
information on proper handling, refer to SSYA008.
Related Documentation From Texas Instruments
The URLs below are correct as of the date of publication of this manual. Texas
Instruments applications apologizes if they change over time.
- THS4503 data sheet (literature number SLOS350)
- Application report (literature number SLOA054), Fully Differential
Amplifiers
- Application report (literature number SLOA069 ), How (Not) to Decouple
High Speed Op Amp Circuits,
http://www−s.ti.com/sc/psheets/sloa069/sloa069.pdf
- Application report (literature number SLOA072 ), Single Supply Differen-
tial Op Amp Techniques,
http://www−s.ti.com/sc/psheets/sloa072/sloa072.pdf