Topcom Cocoon 95 - Manual (Page 12)

12 Topcom Cocoon 95
Topcom Cocoon 95
• Press the Memory button to confirm.
4.14 ACTIVATE/DEACTIVATE KEY TONES
• Press the Set button .
• Press numerical button ‘1’.
• Press numerical button ‘1’ again to activate/deactivate this function.
• Press the Memory button . The unit emits a confirmation tone.
Default setting: key tones activated.
4.15 SETTING THE RING MELODY
• Press the Set button .
• Press numerical button ‘2’.
• Select the desired ring melody (1-4).
• Press the Memory button . The unit emits a confirmation tone.
Default setting: ring melody 2
4.16 SETTING THE RING VOLUME
• Press the Set button .
• Press numerical button ‘3’.
• Select the desired ring volume (off, low, high) by pressing numerical button 1 repeatedly.
• Press the Memory button . The unit emits a confirmation tone.
Default setting: ring volume high
4.17 AUTOMATIC ANSWERING
It is possible to program the unit in such a way that, when you receive a call, you only have
to pick up the handset to connect directly to the external caller. It is no longer necessary to
press the Line button
first to accept the call.
• Press the Set button .
• Press numerical button ‘4’.
• Press numerical button ‘1’ to activate/deactivate this function.
• Press the Memory button . The unit emits a confirmation tone.
Default setting: off
Note: When a call comes in and the handset is not lying on the base unit, you
always have to press the Line button
to accept the call, even when the
function ‘Automatic answering’ is activated.
4.18 DEFAULT SETTINGS (RESET)
If you want to reset the default settings of the unit, please take the following steps:
•
Press the Set button .
• Press numerical button ‘0’.
• Enter the 4 digit PIN code.
Coc95_eur.book Page 12 Monday, January 5, 2004 10:07 AM