Setting the transmission rate – Transcend Information 128MB-256MB JetFlash User Manual
Page 19
Advertising
17
4. Select Apply to finish.
Setting the Transmission Rate
JetFlash supports four kinds of transmission rates. You can follow the procedures below to set
the transmission rate.
1. Execute
the
WLAN Utility.
2. Select
the
Setting tab and then select Advance.
3. Select one of following transmission rates and then select Apply to set the transmission rate.
•
Fully Auto (Default)
•
Fixed 11Mbps
•
Fixed 5.5Mbps
•
Auto 1 or 2Mbps
Advertising