Operating sequence, Load the laundry, Measure out the detergent – Tricity Bendix AW 1100 S User Manual

Page 7: Measure out the fabric softener, Select the required option, Select the required programme

Advertising
background image

7

Operating Sequence

Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.

WASHING 4.5 KG OF WHITE COTTON AT 95°C

Suppose you have 4.5 kg of normally dirty laundry to
wash. It is white cotton and is suitable for high
temperature washing.

1. Load the laundry

Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment

.

If you wish to carry out the prewash, pour detergent into
the compartment marked

.

C0021

P0004

3. Measure out the fabric

softener

If required, pour fabric softener into the compartment
marked

(the amount used must not exceed the

“MAX” mark in the drawer).
Close the drawer gently.

4. Select the required option

Depress QUICK WASH button, if required.

5. Select the required programme

Turn the programme selector dial clockwise to the
programme 1 or 2.

1

P1006S

QUICK

WASH

C0020

132992130.qxd 3/27/03 4:44 PM Pagina 7 (Nero/Process Black pellicola)

Advertising
This manual is related to the following products: