TP-Link TL-WR740N - Manual (Page 78)

TL-WR740N Wireless Lite N Router
- 71 -
3. In Day field, check the Select Days radio button and then select Sat and Sun.
4. In Time field, enter 1800 in Start Time field and 2000 in Stop Time field.
5. Click Save to complete the settings.
Then you will go back to the Schedule Settings page and see the following list.
4.12 Static Routing
Choose menu “Static Routing”, and you can configure the static route in the next screen, shown
in Figure 4-56. A static route is a pre-determined path that network information must travel to
reach a specific host or network.
Figure 4-56 Static Routing
To add static routing entries, follow the steps below.
1. Click Add New… shown in Figure 4-56, you will see the following screen Figure 4-57.
Figure 4-57 Add or Modify a Static Route Entry
2. Enter the following data.
¾ Destination IP Address - The Destination IP Address is the address of the network or
host that you want to assign to a static route.