Tricity Bendix TB 85 F - Manual (Page 4)

DESCRIPTION OF THE APPLIANCE
4
B
C
A
N S 0 6 5 4 3 2
1
A - Freezer controls
B - Compartments for freezing fresh foods
C - Compartments for frozen food storage
17
Printed on recycled paper
Door reversal
1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store food
in a cool place.
3. Gently lay the freezer on its back with the top held
away from the floor by 5-8 cm (2-3 inches) of
packing;
4. Remove the feet (3)
5. Remove bottom hinge (1).
6. Slide out the door from pin (G), unscrew the
latter and then screw it down into the hinge
provided on the opposite side, after having
removed the small plugs which should then be
fitted on the opposite side.
7. Refit the door and bottom hinge (1) on the
opposite side.
8. Refit the feet (3) on the opposite side.
9. Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch.
Cover the holes left open with the plugs contained
in the documentation pack.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
D715 PIED/M
1
2
3
G
PR220