3 configuring upnp on the thomson gateway, Introduction, Enable/disable upnp – Technicolor - Thomson TG585 V8 User Manual
Page 41: Extended security, Enable/disable extended security, Configuring upnp on the thomson gateway
E-DOC-CTC-20090708-0001 v1.0
35
4
Thomson Gateway Tools
4.1.3
Configuring UPnP on the Thomson Gateway
Introduction
On the
you can:
.
Enable/Disable
Enable/Disable UPnP
Proceed as follows:
1
Browse to the
2
On the Toolbox menu, click Game & Application Sharing.
3
Under Universal Plug and Play:
Select the Use UPnP check box, to enable UPnP.
Clear the Use UPnP check box, to disable UPnP.
4
Click Apply.
Extended Security
If Extended Security is enabled only limited UPnP operation between the host and the Thomson Gateway is
allowed:
A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You can
then only connect/disconnect the Internet connection via the
Address translation mappings can only be added or changed via UPnP for the host on which the UPnP
application is running.
Enable/Disable Extended Security
Proceed as follows:
1
Browse to the
2
On the Toolbox menu, click Game & Application Sharing.
3
Under Universal Plug and Play, select Use Extended Security.
4
Click Apply.