TANDBERG MXP 550 - Manual (Page 10)

D1374201_User_Manual_T550_T770_MXP_CCM
2
1.1 At a Glance
Codec
The Codec is the heart of the system. The main task for the Codec is the compression of
outgoing video, audio and data, the transmission of this information to the far end and the
decompression of the incoming information - the name Codec comes from a combination of the
two words compression and decompression.
Remote control
The remote control is used to control all functions of the
system. If the screen saver is activated (black monitor),
touching the remote control will automatically wake up the
system. The remote control uses 4 AAA batteries. The
system will tell you when batteries are running low.
Change the batteries at the back of the remote control.
The reach of the remote control signal is 20 meters. For
users sitting in an open plan office, this can cause
problems. Use the little, white switch placed under the
batteries to change the reach of the signal from 20 meters
to 2 meters. This will prevent you from unintentionally
controlling your neighbor's video system, when you
control your own system.
Camera
The built-in camera unit includes a high quality color camera with a fast pan/tilt/zoom action. The
camera is controlled by the system's infrared remote control and operates pan/tilt and zoom.