Toshiba U300 Series PSA50 YXT - Manual (Page 86)

User’s Manual 6-12
Power and Power-Up Modes
3. Insert the battery pack.
4. Ensure the battery pack lock is moved into its locked position.
Securing the battery pack
Starting the computer by password
To start up the computer with the user password, follow these steps:
1. Turn on the power as described in Chapter 3,
Getting Started . The
following message appears:
2. Enter the password.
3. Press Enter.
Power-up modes
The computer has the following power-up modes:
■ Boot Mode: Computer shuts down without saving data. Always save
your work before you turn the computer off in boot mode.
■ Hibernation Mode: Data in memory is saved to the hard disk.
■ Standby Mode: Data is maintained in the computer's main memory.
Battery
Pack
Lock
Battery pack
Password=
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
Refer also to the sections Turning on the power and Turning off the power
in Chapter 3, Getting Started .