Tiger Mowers FLX10 - Manual (Page 7)

FLX15/10 09/05 6-7
Ref. Part No. Description Qty.
1 264-004 Retaining ring, internal 1
2 356-310 Locking Collar / Bearing set 1
3 A101-150 Bearing holder 1
4 A101-152 Rubber ring, vibration isolator 2
5 A101-153 Bearing stand 1
6 A101-155 Washer, 4-1/16" x 7 ga 1
7 264-014 Retaining ring, external 1
8 A101-154 Shield 1
9 270-007 Locknut, 1/2" UNC 4
10 256-011 Washer, 1/2" 2
11 250-057 Bolt, 1/2" x 2" UNC 2
12 273-006 Grease nipple, self tap 2
13 250-127 Bolt, 1" x 2-1/2" UNC 2
14 250-060 Bolt, 1/2" x 1-3/4" UNC 2
15 270-002 Locknut, 1" UNC 2
16 271-006 Cotter pin, 3/16" x 2" 1
17 257-009 Hex slotted nut, 1" UNC 1
18 256-001 Washer, 1" SAE type 1
19 A101-156 Bearing stand mount 1
20 256-017 Washer, 3/8" 4
21 250-018 Bolt, 3/8" x 1" UNC 4
22 255-013 Lockwasher, 3/8" 4
23 341-6241 SFT shield 1
24 A101-157 Spacer, 1.151" Long 1
A101-158 Spacer, 0.871" Long 1
NOTE: USE LONG SPACER (ITEM 24, 1.151" LONG) FIRST AND IF TOO LONG TO
ALLOW THE TRACTOR SHAFT TO BOLT ON USE SHORT SPACER (0.871" LONG)
BEARING MOUNT ASSEMBLY