Turbosound LMS-A6 - Manual (Page 13)

user manual
LMS-A6
LMS-A6 user manual
Page 13
TECHNICAL SPECIFICATIONS
Inputs Inputs Inputs Inputs Two electronically balanced
Impedance > 10k ohms
CMRR >65dB 50Hz - 10kHz
Outputs Outputs Outputs Outputs Six electronically balanced
Source Imp < 60ohms
Min. Load 600ohms
Max. Level +20dBm into 600 ohm load
Frequency Response Frequency Response Frequency Response Frequency Response ±0.5dB 20Hz - 20kHz
Dynamic Range Dynamic Range Dynamic Range Dynamic Range >110dB 20Hz -20kHz. Unwtd
Distortion Distortion Distortion Distortion < 0.02% @ 1kHz, +18dBm
Maximum Delay Maximum Delay Maximum Delay Maximum Delay 650 mS. (Increment 2....6 µS)
Output gain Output gain Output gain Output gain adjustable +6dB to -6dB
High and Lowpass Filters High and Lowpass Filters High and Lowpass Filters High and Lowpass Filters
Filters
1 of each per output
Subsonic filter user specified up to 24dB/octave
Low mid filter user specified up to 24dB/octave
High mid filter user specified up to 24dB/octave
Ultra sonic filter user specified up to 12dB/octave
Response Bessel / Butterworth 12/18/24dB /oct and Linkwitz-Riley 24dB /oct
Limiters Limiters Limiters Limiters
Threshold
+1dB to -10dB in 1dB steps
Output meters Output meters Output meters Output meters 6 x 6 point, -24dB to +4dB into limit
Connectors Connectors Connectors Connectors
Inputs
3 pin female XLR
Outputs 3 pin male XLR.
Power 3 pin IEC
Power Power Power Power 85 to 130V or 190 to 260V (set internally) @ 50/60Hz
Fuses Fuses Fuses Fuses 230V T200mA, 115V T1250mA
Consumption Consumption Consumption Consumption 25 VA
Net weight Net weight Net weight Net weight 3.9kg (8.6lbs)
Size Size Size Size 1.75"(1U) x 19" x 9.9" (44mm x 482mm x 252mm) excl. connectors.
Due to continuing product improvement the above specifications are subject to change.