Toshiba SD-44HKSE EN - Manual (Page 27)

OPERA
TION
27
Speaker Setup
Adjust the following settings for the built-in 5.1 channel
surround decoder.
11 Select “5.1 Speaker Setup” using the 3 3/4 4
buttons on the setup menu.
2 2 While “5.1 Speaker Setup” is selected, press 2
button.
3 3 Press 2 2 buttons to select the desired speaker.
4 4 Adjust options by using 3 34 41 1 2 2 buttons.
Speaker selection
Select a speaker that you want to adjust. ((Front speak-
ers (Left), Front speakers (Right), Centre Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
Note
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Press 1 1 / 2 2 to adjust the output level of the selected
speaker. (-6dB ~ +6dB)
Size
Since the speaker settings are fixed, you cannot change
the settings.
Distance
If you connected speakers to your DVD/CD Receiver ,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time.
Note
You can not set the distance of subwoofer speaker.
Test
Press ENTER to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
Front Left (L) → Centre → Front Right (R) →
Rear Right (R) → Rear Left (L) → Subwoofer
Return
Press ENTER to return to the previous menu.
Last Condition Memory
This DVD/CD Receiver memorizes the user settings for
the last disc that you have viewed. Settings remain in
memory even if you remove the disc from the player or
switch off the player. If you load a disc that has its set-
tings memorized, the latest stop position is automatical-
ly recalled.
Notes
Settings are stored in memory for use any time.
This DVD/CD Receiver does not memorize settings of
a disc if you switch off the DVD/CD Receiver before
commencing to play it.
This function does not work when STOP is pressed
twice (“
” will appear on the screen).
System Select
You must select the appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold PAUSE on the front panel or remote
control for more than 5 seconds to be able to select a
system (PAL, NTSC, or AUTO).
When the selected system does not coincide with the
system of your TV, normal colour picture may not be
displayed.
AUTO: Select when DVD/CD Receiver is connected
with Multi system TV.
NTSC: Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL: Select when DVD/CD Receiver is connected
with PAL-TV.
VCD1.1 CD DVD
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
R R
Front L
Volume 0 dB
Size Small
Distance 0.3m
Test
Return
Additional Information