Technicolor - Thomson 1 4 M S 1 5 F T - Manual (Page 11)

GB
10
Day to Day Operation
Switching On - Selecting Programmes
Switch on the television set using the main ON/OFF switch if the indicator is off.
If it is on, enter the desired programme number.
For programmes 1 to 9:
Press the corresponding number on the remote control.
For programmes 10 to 99 (e.g. 24) :
Press and hold the decimal (tens) number (2): 2 -
then press the units (4) number briefly: 2 4
Volume Adjustment - Sound Mute
Press the buttons to turn the sound up or down.
Press the button to turn the sound off.
The sound returns if the button is pressed again.
Zapping
Press the buttons to scroll through the programmes stored in memory.
Personal Adjustments
Press the red button to call up your personal adjustments (See Picture Adjustments).
Display
Press the yellow button to display the programme number and stand–by time (if sleep
timer command is activated).
If the channel has been fine turned, the symbol is also displayed.
This information disappears automatically after a few seconds. Press the yellow button
again to delete this information.
Stand-by - Sleep Timer
Press the button to switch the television set to stand–by mode. The Stand–by light turns red.
The television set will automatically switch to Stand–by after a few minutes if there is no signal
on the channel being watched.
Child Lock
You can prevent the use of your television set using the keypad.
To do this, switch off the television by pressing and holding down the stand–by button of the
remote control for more than 4 seconds.
The TV set is also child locked:
- after the sleep timer function
- if it has been switched to stand–by or switched off when the sleep timer function has been
programmed.
The stand–by light flashes to indicate that the child lock is activated. The set can only be
switched on again using the numerical keys of the remote control.