Tascam US-1641 - Manual (Page 4)

4 Release Notes: Firmware: 1.02, Windows driver: 1.02, Mac driver: 1.03, Cubase LE 4: 4.0.3
TASCAM US-1641
Release Notes
D01012200E
Printed in China
Cubase LE 4 (4.0.3)
When installing Cubase LE 4 on Windows XP, the •
Cubase LE 4 installer may not give you the opportunity
to select a language.
When installing Cubase LE 4 on Windows Vista, the
•
language selection window can be completely obscured
by the main window. If the installer seems to have
stalled, it may be waiting for you to select a language.
If this has happened, you will see a “
Select Language ”
button in the Windows task bar. Click the “ Select
Language ” button to bring the language selection
window into view.
On OS X, Cubase LE 4’s “Control Panel” does not •
launch the US-1641’s control panel. Instead, use Finder
to launch the “TASCAM US-1641 Control Panel” from
the Applications folder.
Cubase LE 4 allows their ASIO ports to be renamed. In
•
the event it becomes necessary to reset the port names,
perform the following steps:
From the Devices menu, select 11 Device Setup 1
Click on 21 ASIO driver name that exists under VST
Audio System1
Click on
31 Reset that exists in the Port System
Name1
Miscellaneous
When no signal is connected to the digital input, the
US-1641 internally loops back the signal going to the digi-
tal output.
Cubase and Nuendo allow their ASIO ports to be renamed.
In the event it becomes necessary to reset the port names,
perform the following steps:
11 From the Devices menu, select Device Setup 1
21 Click on VST Inputs , then click the Reset button1
31 Click on VST Outputs , then click the Reset button1