Tasco 1575 User Manual

Page 132

Advertising
background image

CR1002 COMMUNICATIONS RECORDER

The CR1002 is a voice recorder, time code generator

and analysis unit all in one. Compact, rugged and versa-

tile voice logging communications recorder. Designed to

withstand vibration, dust, rain and extreme tempera-

tures, the CR1002 incorporates the patented

POSILOCK 1000 cassette tape transport mechanism,

engineered to operate under the severe environmental

conditions found in airborne, mobile and manpack operations. Here are some

of the features: Uses standard cassettes; Auto reverse recording or con-

tinuous loop recording, selectable from the keyboard; Dual speed operation,

keyboard selectable, 1-7/8 ips or 15/16 ips; Built-in-time code generator and

reader, with time search; Extensive self-test (BITE); Automatic recording

(VOX, COR); Auto replay, cue and review facilities; Real time clock with bat-

tery back-up. The recorder has microprocessors controlling its functions

to ensure versatility and ease of use. Made by Signal Design, Inc for the

military (They were bought by Dynamic Instruments, San Diego, CA) and

while no longer manufactured, it is still supported. Will accept any power

source from 12VDC to 28VDC. Unused with operator manual. Does not

include cables or wiring diagrams. Original cost was $3000.00

R1440 $175.00

OMNI DIRECTIONAL SCANNER DIPOLE ASSEMBLY

Wide band scanner antenna vertically polarized 8 ele-

ment omnidirectional dipole assembly. Stands about 6

feet high. Attach your cable and mast and you should

get great reception from the lowest scanner frequen-

cies to the highest.

R1444 $14.50

CONTELCO-GUARD DETECTOR

Type ME-400 detector with 14" antenna. Not a clue

what this is for but our guess is that it's some kind of

detector in the 140 to 150MHz area. On the bottom it

says "This device should be used for the both of ME-

418, ME-450 with product number over three thou-

sands." (Whatever that means). Has 3 circuit boards

and a few components and power connector on the side.

Metal case is 5-3/8" x 2-3/8" x 1-3/4" high. If you can figure out what its

for, it's a steal at 4 bucks. Or use the case and antenna for your own proj-

ect. They look new.

R1455 $4.00

Page 130 - Radio/Electronics

To Order, call toll free: 1-877-7SURPLUS

Advertising