Tyan Computer Transport GT24 B2891 - Manual (Page 27)

Chapter 2: Setting Up 19
2.1 Rack Mounting
The Transport GT24 can be mounted in a rack using the sup-
plied rack mounting kit.
Rack mounting kit
Sliding Rails x 2:
Sliding Brackets x 4 (Front x 2, Rear x 2)
Mounting Ears x 2
Screws Kit x 1
Mounting Brackets x 4
2.1.1 Installing the Server in a Rack
Follow these instructions to mount the Transport GT24
B2891 into an industry standard 19" rack.
NOTE: Before mounting the Transport GT24 in a rack, ensure
that all internal components have been installed and that the
unit has been fully tested. Maintenance can be performed on
the unit while in a rack but it is preferable to install the device
in a fully operational condition.
1. Screw the mounting ear to each side of Transport GT24
as shown using 2 screws from the supplied screws kit.
Mounting Ears