Tyco Voice Assisted Security Control Escort5580TC - Manual (Page 9)

9
S E C T I O N 5
Setting Escort5580TC Options
5.1 Setting The Time and Date
With the system disarmed (Section 3.3—Disarming), access the security system (Section 2—
Accessing Your Security System) and select a partition (Section 2.5—If You Have a Two-
Partition System).
Press [✱]. You will hear the prompt:
“ For Special Functions, press [6].”
Press [6]. The system will prompt:
“ Enter your Master Code.”
Enter the Master Code. The system will prompt:
“ For Time And Date, press [1].”
Press [1]. The system announces the current time and date, and then prompts:
“To change the time, press [1].
To change the date, press [2].
To exit, press [#].”
You may either:
· Press [1] to change the time. The system will prompt:
“ Enter four digits for 24-hour time.”
Enter the time in 24-hour clock format: 00 to 23 for the hour, and 00 to 59 for the minute.
-or-
· Press [2] to change the date. The system will prompt:
“ Enter six digits for the month, day, and year.”
Enter 01 to 12 for the month, 01 to 31 for the day, and 00 to 99 for the year.
Upon programming information into either of these two sections the system will again
announce the Time and Date menu.
5.2 Volume Control
The volume of the system messages/prompts can be controlled with this feature.
With the system disarmed (Section 3.3—Disarming), access the security system (Section 2—
Accessing Your Security System) and select a partition (Section 2.5—If You Have a Two-
Partition System).
Press [✱]. You will hear the prompt:
“ For Special Functions, press [6].”
Press [6]. The system will prompt:
“ Enter your Master Code”
Enter the Master Code. The system will prompt:
“ For Volume Control, press [2].”