Tekkeon MYPOWER ALL PLUS MP3450 R2 - Manual (Page 17)

15 USER GUIDE
Using Multiple Batteries
You can increase the capacity of myPower ALL Plus by adding one or more extra battery units. There are
two options for adding multiple batteries:
• Add an Extended Battery, MP3450-10, which is attached to the first battery with a bracket, and can be
used only as a second battery.
• Add one or more additional myPower ALL Plus batteries using an optional 6-Pin Cable (one cable
per additional battery).
Adding the Extended Battery
1. Place MP3450 R2 on top of MP3450-10 with both flat silver ends facing the
same direction.
2. Connect the bracket with the 3-Pin plugs inside to the silver ends of
the devices. The 3-Pin plugs will mate with the battery port
on each of the devices, and the controls on the end of
MP3450 R2 will show through the bracket opening.
3. Connect the second bracket on the opposite end of the
devices to hold the units together securely.
4. Use MP3450 R2 as you would normally.
Adding Another Battery
1. Connect the optional 6-Pin Cable to the 6-Pin Input Port on both batteries.
or
Use the Optional myPower ALL Plus Bracket to connect the batteries as described in the previous section.
All batteries will be charged/discharged at the same time (in parallel).