Tekkeon ezTalker mini ET2000 - Manual (Page 13)

11 USER GUIDE
Visual and Audible Indicators
Two LEDs (blue and amber) indicate the status of the headset, while tones heard through the
headset provide an audible indication of a requested action. Following are descriptions of visual
and audible indicators provided by your ezTalker mini headset.
Visual Indicators
LED Status Indicates
Blue LED flashes at two-second Headset is in standby mode, ready to make and receive calls.
intervals
Blue and amber LEDs flash Headset is in pairing mode.
alternately
Blue LED flashes twice quickly The headset is attempting to make an audio connection to the phone. This
at one-second intervals occurs when you press the TALK button, or make a call using voice dialing.
Blue LED flashes four times The headset is in talk mode.
quickly at one-second intervals
Amber LED flashes every Battery is low.
32 seconds
Both LEDs are off Headset is off.
Audible Indicators
Tone Indicates
Double beep, increasing in pitch Headset has been turned on.
Double beep, decreasing in pitch Headset is about to turn off.
A beep every 32 seconds Battery is low.
Double chime, followed by Headset has been put into pairing mode.
low beep
Beeps every four seconds Headset is muted.
while a call is connected
UG_et2000_v1.2_r1 10/21/05 11:05 AM Page 11