Specifications – Perreaux E110 User Manual
Page 2
www.perreaux.com
Specifications:
Power Output
100W
rms
per channel continuous both channels driven into 8Ω from 20Hz to 20kHz at no more
than 0.05% Total Harmonic Distortion from 0.25W to rated power
160W
rms
per channel into 4Ω
Frequency Response ........................................................................................20Hz-20kHz ±0.25dB
.......................................................................................................................-1dB @ 6Hz and 65kHz
Total Harmonic Distortion
Rated power ..............................................................................................................0.003% @ 1kHz
Worst case prior to clipping ...................................................................................................... 0.05%
Dynamic Headroom (with music) ..............................................................................................> 2dB
Amplifier Saturation..............................................................................> 250W per channel into 8Ω
Voltage Swing ...................................................................................................... 108V
p-p
per channel
Current Output
Short Duration Continuous ................................................................ 10A per channel (fuse limited)
Rise Time ........................................................................................................................Typically 1μs
Phase Response...........................................................................................+2° at 20Hz -2° at 20kHz
Channel Separation............................................................................................> 60dB 20Hz-20kHz
Damping Factor..............................................................................................> 500 from 10Hz-1kHz
....................................................................................................................................... 800 @ 100Hz
Hum and Noise (unweighted) ................................................. 95dB below rated output 20Hz-20kHz
Input Sensitivity .............................................................................. 1.5V
rms
for rated output @ 1kHz
Input Impedance ........................................................................................................................ 47kΩ
Driver Stage .............................................................................................................................Class A
Output Devices ..................................................................................................... Extended Class AB
Dimensions
Width...........................................................................................................................430mm (17.0”)
Height..............................................................................................................................95mm (3.8”)
Depth...........................................................................................................................325mm (12.8”)
Weight ............................................................................................................................7.5kg (17.0lb)
;
Schematic diagram
;
Product manual