Taylor Today's weather 24 hour forecaster 1383 - Manual (Page 7)

7
Additional Features 7
Low Battery Warning
Base unit – replace both batteries when the “ ” icon appears
on the right side of the screen.
°C/°F Selection
Press the “C/F” button on the back of the base unit to switch
between Fahrenheit and Celsius temperatures.
Backlight
Press the Backlight button on the top of the base unit. The LCD
screen will light up for approximately 5 seconds.
Remote sensor – replace both batteries when the “ ” icon
appears on the left side of the screen.
Setup:
Place the base unit as close as possible to the remote sensor during
setup. This will ensure the best reception of signals as you set up your
wireless forecaster.
Location:
Position the base unit and remote sensor within the effective trans-
mission range of 200 feet (60 meters).
Place the base unit indoors in a well-ventilated location away from
direct sunlight.
Place the remote sensor in a dry, shaded area. Direct sunlight will
heat the casing and inflate temperatures readings.
Tips 8