Toshiba SD-63HK - Manual (Page 22)

22
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
Dynamic Range Control (DRC) Line1 Select
If you connect an another unit (DVD, VCR or etc.) to
the LINE IN1 sockets, you must select the type of
audio input.
Press SETUP in the stop mode.
Press
b b b b b or a a a a a to select “Audio”, then press
5 5 5 5 5 or ENTER.
1
2
3 Press
a a a a a or ENTER, then press 4 4 4 4 4 or 5 5 5 5 5 to
select the appropriate type of audio input.
DRC
Line1 Select Std
Language Picture Audio Parental
BACD/Enter/Setup/Return
Optical
Coaxial
Analog
Coaxial
4
Press SETUP or RETURN to close the screen. 5
Press ENTER.
The selected appropriate type remains.
Press
4 4 4 4 4 or 5 5 5 5 5 to select “Line1 Select”.
DRC
Line1 Select Std
Language Picture Audio Parental
BACD/Enter/Setup/Return
Coaxial
Press
a a a a a or ENTER, then press 4 4 4 4 4 or 5 5 5 5 5 to
select your desired sound type.
3
DRC
Line1 Select Std
Coaxial
Language Picture Audio Parental
BACD/Enter/Setup/Return
Max
Std
Min
Max: Full dynamic range is increased.
Std:
Full dynamic range is maintained.
Min: Dynamic range is reduced.
Press SETUP in the stop mode.
Press
b b b b b or a a a a a to select “Audio”, then press 5 5 5 5 5
or ENTER.
1
2 Press
4 4 4 4 4 or 5 5 5 5 5 to select “DRC”.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ depending
on DVD video disc.
DRC
Line1 Select
Language Picture Audio Parental
BACD/Enter/Setup/Return
Coaxial
Std
4
Press SETUP or RETURN to close the screen. 5
Press ENTER.
The selected sound type remains.
Optical: The Optical lead is connected to the
OPTICAL IN socket.
Coaxial: The Coaxial lead is connected to the
COAXIAL IN socket.
Analog: The Audio/Video lead is connected to the
Audio(L/R)/VIDEO INPUT(LINE IN1)
sockets.