Safety, Important safety instructions, Read and save these instructions – Thermador MEMCW271 User Manual

Page 3: Appliance handling safety, Safety codes and standards, Electric safety, Related equipment safety

Advertising
background image

English 1

Safety

WARNING:

If the information in this manual is not followed exactly, fire
or shock may result causing property damage or personal
injury.

WARNING:

Do not repair or replace any part of the appliance unless
specifically recommended in the manuals. Improper
installation, service or maintenance can cause injury or
property damage. Refer to this manual for guidance. All
other servicing should be done by a qualified technician.

Appliance Handling Safety

Do not lift appliance by door handle. Remove the door for
easier handling and installation. See instructions in Use
and Care Manual.

Unit is heavy and requires at least two people or proper
equipment to move.

Hidden surfaces may have sharp edges. Use caution when
reaching behind or under appliance.

Safety Codes and Standards

This appliance complies with one or more of the following
Standards:

UL 858, The Standard for the Safety of Household
Electric Ranges

UL 923, The Standard for the Safety of Microwave
Cooking Appliances

UL 507, The Standard for the Safety of Electric Fans

ANSI Z21.1, The American National Standard for
Household Cooking Gas Appliances

CAN/CSA-C22.2 No. 113-M1984 Fans and Ventilators

CAN/CSA-C22.2 No. 61-M89 Household Cooking
Ranges

It is the responsibility of the owner and the installer to
determine if additional requirements and/or standards
apply to specific installations.

Electric Safety

Before you plug in an electrical cord, be sure all controls
are in the OFF position.

If required by the National Electrical Code (or Canadian
Electrical Code), this appliance must be installed on a
separate branch circuit.

Installer - show the owner the location of the circuit
breaker or fuse. Mark it for easy reference.

Important - Save these instructions for the local electrical
inspector's use.

Before installing, turn power OFF at the service panel. Lock
service panel to prevent power from being turned ON
accidentally.

Refer to data plate for more information. See "Data Plate"
under "Service" for data plate location.

Be sure your appliance is properly installed and grounded
by a qualified technician. Installation, electrical connections
and grounding must comply with all applicable codes.

Related Equipment Safety

Remove all tape and packaging before using the appliance.
Destroy the packaging after unpacking the appliance.
Never allow children to play with packaging material.

Never modify or alter the construction of the appliance. For
example, do not remove leveling legs, panels, wire covers
or anti-tip brackets/screws.

Important Safety
Instructions

READ AND SAVE THESE
INSTRUCTIONS

Advertising
This manual is related to the following products: