Toshiba 32WLT66A - Manual (Page 21)

21
Using the TV’s features (General)
Using the cinema mode
- analog only -
A movie film’s picture runs at 24 frames a second, whereas
movie software such as DVD, etc., that you enjoy watching on
television at home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a smooth motion
and picture quality, select the On mode.
Effective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i and 576i signals.
1
Press
M, then press I or i to display the PICTURE menu.
2
Press u or U to select Cinema mode, then press I or i
to select On or Off.
Note:
When a DVD movie with subtitle is playing back, this mode
may not work correctly.
Using the auto format
When the TV receives a true HDMI signal picture and the auto
format is On, it will automatically be displayed in HDMI
signal format, irrespective of the TV’s previous setting.
When in Digital TV, the display format will follow the
broadcasted format.
1
Press
M, then press I or i to display the FUNCTION
menu.
2
Press u or U to select Auto format, then press I or i to
select On or Off.
Activating the ANT ATT (Antenna
Attenuation)
If the signal being received by the TV is too strong, this may
result in picture interference and/or buzzing sound. Setting
ANT ATT to On reduces signal strength, and can help to
remove the interference.
1
From SET UP menu, press u or U to select ANT ATT.
2
Press I or i to select On or Off.
PICTURE
MENU Back Watch TV EXIT
OK Picture settings
Off
Base color adjustment
3D Color management
Cinema mode On
FUNCTION
MENU Back Watch TV EXIT
Teletext Auto
Auto for mat
Blue screen
Side panel
On
On
1
ANT ATT
Manual tuning OK
AV connection OK
Picture position OK
Auto tuning OK
Language
SET UP
MENU Back Watch TV EXIT
English
Off