True Fitness ADI-10260-I - Manual (Page 7)

IMPORTANT
ASSEMBLY INFORMATION
 Tools Required for Assembling the Bench: Two Adjustable Wrenches and Allen
Wrenches.
 NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.
 Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to
be assembled. Attach washer only to end of the Carriage Bolt.
 Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to
be assembled.
 Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not
tighten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
©IMPEX INC. www.impex-fitness.com 6