Description of the washing machine, Control panel – Ariston ARTXD 149 User Manual

Page 16

Advertising
background image

16

GB

Control panel

TEMPERATURE

Button

WASH

CYCLE

SELECTOR

Buttons

FUNCTION

buttons

ON/OFF

button

SPIN SPEED

Button

START/PAUSE

button with indicator light

CONTROL

PANEL

LOCK

Button

DISPLAY

DELAYED

START

Button

MEMORY

Button

Description of the washing

machine

ON/OFF button : press this briefly to switch the

machine on or off. The START/PAUSE indicator light,

which flashes slowly in a green colour shows that the

machine is switched on. To switch off the washing

machine during the wash cycle, press and hold the

button for approximately 2 seconds; if the button is

pressed briefly or accidentally the machine will not

switch off. If the machine is switched off during a

wash cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR buttons: used to set the

desired wash cycle (see "Table of wash cycles").

MEMORY button: press and hold the button to store

a cycle with your own set of preferences in the

memory of the machine. To recall a previously stored

cycle, press the MEMO button.

FUNCTION buttons: press the button to select the

desired function. The corresponding indicator light on

the display will switch on.

SPIN button : press to reduce or completely

exclude the spin cycle - the value is indicated on the

display.

TEMPERATURE button

: press to decrease the

temperature: the value will be shown on the display.

CONTROL PANEL LOCK button

: to activate the

control panel lock, press and hold the button for

approximately 2 seconds. When the symbol

is

illuminated, the control panel is locked. This means it

is possible to prevent wash cycles from being modified

accidentally, especially where there are children in the

home. To deactivate the control panel lock, press

and hold the button for approximately 2 seconds.

DELAYED START button

: press to set a delayed

start time for the selected wash cycle. The delay time

will be shown on the display.

START/PAUSE button with indicator light: when the

green indicator light flashes slowly, press the button to

start a wash cycle. Once the cycle has begun the

indicator light will remain lit in a fixed manner. To

pause the wash cycle, press the button again; the

indicator light will flash in an orange colour. If the

symbol

is not illuminated, the door may be

opened. To start the wash cycle from the point at

which it was interrupted, press the button again.

Standby mode

This washing machine, in compliance with new

energy saving regulations, is fitted with an automatic

standby system which is enabled after about 30

minutes if no activity is detected. Press the ON-OFF

button briefly and wait for the machine to start up

again.

Advertising