Tannoy DS15i - Manual (Page 5)

Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473 E: [email protected]
E: [email protected]
E: [email protected]
E: [email protected]
Definition Install DS15i sub
Tannoy adopts a policy of continuous improvement and product specification is subject to change Definition Install DS15i Sub data file // issue 1.06 // 15.01.08
The bass loudspeaker shall consist of a 380mm (15.00”) low frequency transducer mounted within a vented direct radiating enclosure.
Performance of the loudspeaker, without any electronic control shall meet or exceed the following criteria: Frequency response measured at 1 metre on axis
with swept sine wave shall be 36Hz. Sensitivity shall be at least 96dB (half space) for 2.83 Volts @ 1 metre and shall be capable of producing a peak output
level of 130dB (half space) on axis at 1 metre.
The system shall have a nominal impedance of 8 Ohms and maximum power handling shall be 1200 Watts (programme). The enclosure shall be an
optimally tuned (76 litre) vented enclosure of MDF construction finished in a wear resistant textured black paint.
Input connectors shall be two binding posts and the enclosure shall be fitted with 8 x M10 flying inserts and 4 x rubber feet.
The enclosure shall not exceed the following dimensions:
525 x 460 x 430mm or 20.67 x 18.11 x 16.93” (H x W x D)
The bass loudspeaker shall be the Tannoy… Definition Install DS15i sub.
Architectural specifications