Thermador DWHD94BF - Manual (Page 17)

15
Figure 25
3. Return the rinse agent dispenser cover to its
shut position and press it firmly so that it
snaps shut.
NOTE: Figure 26b represents a completely
empty rinse agent reservoir.
4. Refill the rinse agent dispenser when the
rinse agent reservoir level indicator as
shown in Figure 26b begins to show a silver
background with black lines or when the
“Refill Rinse Agent” indicator appears on the
dishwasher control panel.
NOTE: After the rinse agent reservoir is filled
and the dishwasher door is shut, within a few
minutes the “Refill Rinse Agent” indicator will
turn off.
2. Add liquid rinse agent to the dispenser as
shown in Figure 26a until the rinse agent
reservoir is full.
Figure 26
a
b
Filling the Rinse Agent Dispenser
(Lowered Position)
1. Press the blue release button as shown in
Figure 25 and lift the cover.
Figure 24
Opening the Detergent Dispenser Cover
(Lowered Position)
NOTE: Pressing down on the blue release tab
will not open the cover.
1. Press the blue release tab into the dispenser
as shown in Figure 24.
Figure 23
Filling the Detergent and Rinse
Agent Dispenser
The detergent and rinse agent dispenser can be
filled from two positions: the lowered position,
with the dishwasher door fully open or the raised
position, from a more comfortable posture with
the dishwasher door half-open.
Filling the Detergent Dispenser
(Lowered Position)
1. Fill the detergent cup as recommended in
Table 1.
2. Slide the cover as shown in Figure 23, arrow
1 and press down firmly as shown in Figure
23, arrow 2 so that the cover snaps shut.
Adding Detergent and Rinse Agent
(continued)
Rinse Agent
Always use a liquid rinse agent, even if your
detergent contains a rinse agent or drying
additive, to achieve proper drying and proper
maintenance of your dishware and dishwasher.
The control display will indicate “Refill Rinse
Agent” when the cup needs filling. After rinse
agent is added, “Refill Rinse Agent” will
disappear.
2. The cover
will slide
open to
the left.