Toastmaster 2246 - Manual (Page 5)

5
Mounting
Bracket
Removable
Piercing Lever
Bottle Opener
Magnetic Lid
Holder
Bag Opener
Knife sharpener
Cord Storage
(not shown)
Removable
Locking Knob
HOW TO USE YOUR UNDER-CABINET CAN OPENER
1. Attach Piercing Lever as shown in Figure 6.
2. Raise piercing lever and place the rim of a can at an angle behind the
piercing lever.
3. Lower the piercing lever. This starts the cutting action. The lever will remain
down until the lid is completely cut. Then it will stop automatically.
4. Hold the can and raise the lever to release the can.
5. Carefully slide the lid away from the magnet.
TIPS
•
This can opener is designed to open cans only when mounted under a
cabinet. The motor will operate if the unit is not mounted, but do not
attempt to open cans unless properly mounted.
•
If there is a ridge in the rim of the can, open the other end or begin the
cutting action immediately after the ridge.
•
For extremely large or heavy cans, it is recommended that you lightly
support the can as it is being opened.
TO OPEN BOTTLES
Insert the top of the bottle so the cap is under the metal hook. Lightly
support the back of the can opener and then press the bottle down until the cap
is removed.
TO OPEN BAGS
Hold the plastic bag along the right side, with both hands at the top corner.
Insert the upper edge of the bag into the opener and slide the bag from left to
right.
FIGURE 5