Panasonic WV-SP102 - Manual (Page 19)

18 18
19
Configure the settings relating to images [Image]
The settings relating to JPEG and H.264 images such as the settings of image quality, etc. can be configured on
this page.
The "Image" page has 2 tabs; the [JPEG/H.264] tab and the [Image/Privacy] tab.
Configure the settings relating to the aspect ratio [JPEG/H.264]
Click the [JPEG/H.24] tab on the "Image" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
[Aspect ratio]
Select "4:3" or "16:9" for the aspect ratio.
Default: 4:3
Configure the settings relating to JPEG images [JPEG/H.264]
Click the [JPEG/H.24] tab on the "Image" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
■ JPEG
Configure the settings such as "Refresh interval
(JPEG)*", "Image capture size" and "Image quality" on
this section. Refer to page 20 for further information
about the settings relating to H.264 images.
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image
from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/
6fps*/ 10fps*/ 12fps* (PAL model)/ 15fps*/ 30fps*
Default: 5fps
Note:
• When "On" is selected for "H.264 transmission", the
refresh interval may be longer than the set value
when any value with an asterisk (*) on the right is
selected.
[Image capture size (Initial display)]
Select the image capture size to display the JPEG
image on the "Live" page for the first time.
• When "4:3" is selected for "Aspect ratio"
QVGA/ VGA/ 1280 x 960*
1
• When "16:9" is selected for "Aspect ratio"
320Ч180/ 640Ч360/ 1280 Ч720*
1
Default: 1280x960* 1
VGA* 2
*1
SP105
*2
SP102
Note:
• i-PRO Series does not support aspect ratio of
"16:9", if not specified (as of October 2010).
• Image adjustment functions are activated for the
angle of view in the aspect ratio of 4:3 even while
"16:9" is being selected for "Aspect ratio". Area
masking under the backlight compensation (BLC)
function can be set only when the aspect ratio is
"4:3".
If the aspect ratio is changed to "16:9" after setting
of the backlight compensation function, the setting
of area masking is maintained.