Transcend Information PF705 - Manual (Page 9)

8
Connecting to a Computer︱ ︱ ︱ ︱
To transfer pictures between a memory card connected to the Photo Frame and your computer, connect the
Photo Frame to a USB port on your computer using the provided USB cable.
1. Turn on the Photo Frame .
2. Plug the small end of the USB cable into the Mini-B USB port located on the left side of the Photo
Frame.
3. Plug the large end of the cable into an available USB port on your desktop or notebook computer.
WARNING!
•
You must plug in the AC adapter to provide the power necessary to run the Photo
Frame when connecting to a computer.
•
NEVER plug in a USB Flash Drive while the Photo Frame is connected to a
computer.
Windows® 7, Vista and XP
No drivers are required for connecting Photo Frame to your desktop or notebook computer. Windows®
Operating Systems have built-in drivers to support your Photo Frame. Upon successful connection to your
computer, a new Removable Disk drive with a newly assigned drive letter representing the Photo Frame will
automatically appear in the My Computer window and a Removable Hardware icon will appear in the
Windows System Tray.
Your Photo Frame is now ready to transfer data just like an external hard drive. A “ Removable Disk* drive
with newly assigned drive letters representing the Photo Frame’s card slots will appear in the My Computer
window. You can transfer pictures to a memory card currently inserted in the Photo Frame by simply
dragging-and-dropping files or folders onto the Removable Disk drive letter.