TOA Electronics C-CV14-CS PAL - Manual (Page 4)

4
2. GENERAL DESCRIPTION
The C-CV14-CS Color Camera is a high-resolution surveillance camera equipped with a 1/4” CCD. It is
designed to operate on 24V AC or 12V DC.The CS mount permits the optional lens that is the most
appropriate for each application to be selected.
3. HANDLING PRECAUTIONS
• Do not point the camera toward the sun or other strong lighting or reflected light.
• Avoid jarring or striking the camera, as the camera may fail.
• Install the camera in locations where the temperature range does not exceed –10°C to +50°C, and no dew
condensation is formed.
• To clean, wipe with a soft, dry cloth. Never use benzene, thinner or chemically-treated towel to avoid
damage to the camera’s finish.
• To clean the lens, use a camera blower or lightly wipe with lens cleaning paper.
• Picture quality may suffer if camera cables are wired close to other electrical equipment, such as fluorescent
lamps. In such cases, reroute the wiring.
• Monitor screen pictures may become distorted or roll if the camera is used in locations influenced by strong
electrical or magnetic fields from television transmission antennas, motors or transformers. In such cases,
install the cables inside sheet steel cable conduit.
• Use the external power supply unit of the following rating when the camera is operated on 12 V DC.
12 V DC, over 1.0 A
NTSC version complies with Part 15 of the FCC Rules.
Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the security aspects
of this product. UL has only tested for fire, shock or casualties as outlined in UL's Standard(s) for
Safety. UL Certification does not cover the performance or reliability of the security hardware and
security operating software. UL MAKES NO REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY
SECURITY RELATED FUNCTIONS OF THIS PRODUCT.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/ TV technician for help.
Modifications
Any modifications made to this device that are not approved by TOA Corporation may void the authority
granted to the user by the FCC to operate this equipment.