17 juice series specifications, Subsonic filter, Topology – Tapco pmn User Manual

Page 17: Cooling, Indicators, Current consumption, Ac power requirements, Physical dimensions and weight, Disclaimer, Bridged mono operation, 20 hz to 20 khz

Advertising
background image

17

Juice Series Specifications

Subsonic Filter

– 9 dB @ 30 Hz

Topology

J•800, J•1400:

Class AB

J•2500:

Class H

Cooling

Dual variable-speed fans with back to front airflow

Indicators

Channels A and B
SIG (Signal Present), OL (Overload)
POWER

Current Consumption

J•800

J•1400 J•2500

Idle

0.5 A

0.5 A

1.0 A

Musical Program @ 8Ω

3.9 A

5.1 A

8.1 A

Musical Program @ 4Ω

5.0 A

6.7 A

10.0 A

Musical Program @ 2Ω

7.0 A

10.6 A

17.2 A

AC Power Requirements

U.S.

120 VAC, 60 Hz

Europe

240 VAC, 50 Hz

Japan

100 VAC, 50/60 Hz

Korea

220 VAC, 60 Hz

Physical Dimensions and Weight

Height:

3.5 in/89 mm

Width:

19.0 in/483 mm

Depth:

15.7 in/400 mm

Weight:
J•800:

43.6 lb/19.8 kg

J•1400:

48.5 lb/22.0 kg

J•2500:

56.2 lb/25.5 kg

Disclaimer

Since we are always striving to make our products better by
incorporating new and improved materials, components, and
manufacturing methods, we reserve the right to change these
specifications at any time without notice.

Continuous Sine Wave Average Output

Power for each channel with both

channels driven, 20 Hz to 20 kHz

J•800

J•1400

J•2500

2 ohms:

480 W

800 W

1400 W

4 ohms:

300 W

450 W

750 W

8 ohms:

205 W

310 W

575 W

Bridged Mono Operation, 20 Hz to 20 kHz

J•800

J•1400

J•2500

4 ohms:

800 W

1400 W

2500 W

8 ohms:

560 W

900 W

1500 W

Note: Power ratings are specified at 120 VAC line voltage.

Power Bandwidth

5 Hz to 50 kHz (+0, –3 dB)

Frequency Response

25 Hz to 25 kHz (+0, –1 dB)

Distortion

THD and SMPTE IMD; 20Hz to 20kHz
< 0.03% @ 8 ohms

Signal-to-Noise Ratio

> 100 dB below rated power into 4 ohms

Channel Separation

> 90 dB @ 1 kHz

Damping Factor

> 300 @ 1 kHz and below

Input Impedance

20 kΩ balanced
10 kΩ unbalanced

Input Sensitivity

1.15 V (+3.4 dBu) for rated power into 4 ohms

Gain

J•800:

30 dB

J•1400:

32 dB

J•2500:

34 dB

Maximum Input Level

9.75 Vrms (+22 dBu)

Turn On Delay

2.5 seconds

“TAPCO” is a registered trademark of LOUD Technologies Inc. “Juice” is a trademark of LOUD Technologies Inc.
All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.
©2003-2005 LOUD Technologies Inc. All Rights Reserved.

Advertising