Topcom BUTLER 4870 User Manual
Page 11
Topcom Butler 4870 Twin/Triple/Quattro
11
Topcom Butler 4870 Twin/Triple/Quattro
ENGLISH
3.6
Adjust earpiece/handsfree volume
During a normal or handsfree call, press
or
to select volume 1-5.
3.7
Redial a number from the list
You can redial up to 10 of the last numbers called. If you have stored a name in the
phonebook to go with the number, the name will be displayed instead (see § “4 Phonebook” ).
Redial a number from the list:
•
Press
to enter the redial list. Scroll with
or
until the number you want is
displayed.
•
Press
to dial the number or press OPTION to :
–
Delete Call : To delete the number from the list
–
Save Number : To store the number into the phonebook
–
Delete All : To erase all the redial list
3.8
Secrecy function (Mute function)
During conversation you can turn off the microphone so that the person on the other side of
the line will not hear you:
•
Select
using the left menu key to deactivate the microphone.
•
‘Mute ON’ appears on the display
•
Press the left menu key “Off” again to activate the microphone again
3.9
Locating a handset (paging function)
If you forgot where you left your handset you can press the paging key
on the base. All
handset registered with the base will ring for about 30 seconds.
3.10 Keypad lock
You can lock the keypad to prevent accidental dialling while carrying the handset around.
•
Press and hold the ‘#’-key until ‘Keypad locked’ and
icon appears
•
To unlock press left menu key ‘UNLOCK’ followed by the #-key
3.11
Using the alphanumerical keypad
With your telephone, you can also enter alphanumeric characters. This is useful for entering
a name into the phonebook, giving a name to a handset,...
To select a letter, press the corresponding key as many times as necessary. For exapmle, to
select an ‘A’, press ‘2’ once, to select a ‘B’, press ‘2’ twice and so on. To select ‘A’ and then
B consecutively, select ‘A’, wait until the cursor moves on to the next character, then press
‘2’ twice.
To select a space, press ‘0’. To switch between small letters and capitals, press the *-key.