Tannoy 800 - Manual (Page 9)

TECHNICAL SPECIFICATIONS
System
Frequency response (1) 47 Hz - 20 kHz
Recommended amplifier power 60 to 180 W rms into 8
Ω
Power handling Average (2) Programme
90 W rms 180 W rms
Nominal Impedance 8
Ω
Sensitivity (3) 92 dBSPL / 1 W @ 1 m
Distortion < 0.8%
Dispersion (@ -6dB) 90
°
conical
Crossover frequency 1800 Hz
Cabinet
Drive unit 8’’ Tannoy Dual Concentric type 2046
Low frequency design Optimised bass-reflex load, in 21 litres
Cabinet construction MDF (36 mm front panel)
Cabinet finish Spray ‘F’ Vinyl
Cabinet dimensions (HxWxD) 275 mm x 450 mm x 267 mm
Cabinet weight 10.5 kg
Shipping dimensions (HxWxD) 540 mm x 695 mm x 355 mm
Shipping weight 23 kg
NOTES : (1) +/- 3 dB , measured at 1m in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS426A.
(3) Averaged over specified bandwith for half-space envirronment. For anechoixc conditions the figure is to be
decreased by 3 dB.
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.