2 switch – TP-Link MC112CS User Manual
Page 12
Advertising
6
1.5.2 Switch
¾
TP_AUTO: The TP port operates in Auto-Negotiation mode;
¾
TP_DIS: The TP port operates in FORCE mode;
¾
TP_100M: The TP port operates in 100Base-Tx;
¾
TP_10M: The TP port operates in 10Base-T mode;
¾
TP_FDX: The TP port operates in Full-Duplex mode;
¾
TP_HDX: The TP port operates in Half-Duplex mode;
¾
LFP_OFF: The Link Fault Pass Through function disable;
¾
LFP_ON: The Link Fault Pass Through function enable.
Connect different devices, we suggest leaving the switches like these
as shown below, otherwise the Media Converter may not work
normally.
Advertising