Tripp Lite B132-100-WP - Manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: B132-100-WP
VGA over Cat5 Receiver - 110-type Wallplate
Highlights
Use with B132-004 4-Port VGA over Cat5 Local Unit
Gives a finished look to an installation
Built-in Equalization and Gain controls
No external power required
Description
Tripp Lites B132-100-WP gives your VGA over Cat5 installation a finished look at the remote display. Extends a VGA signal up to 500 ft. from the
source at 1024 x 768 @ 60Hz. Video resolutions of up to 1920 x 1440 @ 60Hz are supported. Use in conjunction with B132-004, 4-Port VGA over
Cat5 splitter. 110 punch-down connector on the rear of the unit makes for easy termination of bulk cable runs. Includes 110 punch down tool, as well
as mini screwdriver for Equalization and Gain control adjustments.
Package Includes
B132-100-WP VGA Over Cat5 Extender Wallplate
Screwdriver
110 Punchdown Tool
Owner’s Manual
Features
Works in conjunction with a B132-004 VGA Over Cat5 Extender/Splitter Local Unit (sold separately) to extend a VGA signal up to 500 ft.
(1024 x 768 @ 60Hz) from the source
Utilizes inexpensive Cat5e/6 cable
Compatible with VGA, SVGA, XGA, SXGA and UXGA computer resolutions
Supports video resolutions up to 1920 x 1440 @ 60Hz
Features built-in Equalization and Gain controls to adjust the video image
Compatible with all operating systems
Specifications
PHYSICAL
Unit Dimensions (HWD/in) 4.5 x 2.75 x 1
Unit weight (lbs) 0.4
CONNECTIONS