Tyco PDigital Security PC1565 - Manual (Page 15)

13
From an LCD keypad, the following message will be displayed when each zone is activated...
Use the arrow (< >) keys to view which zone is open. This message will disappear
when the zone is restored.
5. If the panel has any fire zones, activation will cause the alarm signal to sound in a pulsed mode.
CAUTION: Do not use an open flame or burning materials to test a smoke or heat detector. Contact
your installer for information on safe methods of testing detectors.
6. When testing is complete, call and advise the monitoring station. Should the system fail to function
properly, contact your installer.
NOTE: Some features described above will not be functional unless enabled by your installer.
Please ensure that your installer has advised you which features are functional on your system.
Door Chime Feature
The door chime feature is used to provide a tone from the keypad each time a door or window is opened
or closed. The doors and windows which will provide this indication are programmed by your installer.
To activate the door chime from an LED Keypad:
Enter [✱][4] to turn the door chime feature ON and OFF. When the command is entered, the keypad
buzzer will beep 3 times if the door chime feature is enabled and will sound one long beep if it is
disabled.
To activate the door chime from an LCD Keypad:
Press [ ✱ ] to enter the function list, then scroll to find...
Press [ ✱ ] or [4] to enable or disable the Door Chime feature. Press [#] to return to the
Ready state.
Keypad Options
All Keypads
Keypad Sounder Control
The LCD keypad will allow you to select from 21 different keypad tones. From an LCD keypad, enter
[✱][6][Master Code], then use the arrow keys (< >) to scroll to the message "Keypad Buzzer Control".
Press [✱] to select. Use the arrow keys (< >) to scroll to the desired keypad sound level and press the [#]
key to exit. This feature can be accessed on LED keypads by holding the [✱]
key.
LCD Keypads Only
The following three options are accessed by entering [ ✱ ] [6] [Master code]. Use the arrow (< >) keys
to scroll to the appropriate message and press [ ✱ ] to select.
Brightness Control
The LCD keypad will allow you to select from 10 different backlighting levels. Use the arrow keys (< >) to
scroll to the desired backlighting level and press the [#] key to exit.
Contrast Control
The LCD keypad will allow you to select from 10 different display contrast levels. Use the arrow keys (<
>) to scroll to the desired contrast level and press the [#] key to exit.
Viewing the Event Buffer from an LCD Keypad
Select “View Event Buffer” from the [✱][6] menu. The keypad will display the event, event number, time
and date along with the zone number and user code, if applicable. Press [✱] to toggle between this
information and the event itself. Use the arrow keys (<>) to scroll through the events in the buffer. When
you have finished viewing the Event Buffer, press the [#] key to exit.
Secure System
Before Arming <>
Press (*) For<>
Door Chime