Transystem DVB-T - Manual (Page 12)

Chapter 3. System Setup
3.1 How to scan
Before watching or listening to TV/Radio, start “Scan Channel” and choose
one of the four channel scanning methods (including “Country/Region”, “All”,
“Range”, and “Single”) to conduct program scanning. The scan results will be
shown on the TV and Radio lists, you can also save the list for future use.
The program will ask you to scan channel when you first execute DVB-USB.
Step1. Please select a Country or Area you are in.
Step2. Please click “Start” to scan.
Step3. Please click “OK ” when the scan is finished.
3.2 Control panel introduction
The DVB-USB default control panel is shown below. It allows switching to
different panels as required. All main functions can be operated via the
buttons or shuttle on the control panel. Messages delivered to you will be
shown on the left side of the LCD to give you a full understanding of the
current status.
12