TP-Link TL-WN310G - Manual (Page 23)

TL-WN310G 54M Wireless Adapter User Guide
- 17 -
Figure 3-4
¾ WPA/WPA2: Wi-Fi Protected Access.
¾ WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase.
¾ 802.1x: Enables 802.1x security.
¾ Pre-Shared Key (Static WEP): Enables the use of shared keys that are defined on both
the access point and the station. To define shared encryption keys, choose the Shared Key
radio button and click Configure to fill in the Define Shared Keys window.
¾ None: No security (Not recommended).
)
Note:
If the access point, which is associated to the wireless adapter, has WEP set to be Optional and
the client set WEP enabled, make sure that Allow Association to Mixed Cells is checked on the
Security Tab to allow association. To complete WEP encryption configuration, you must select the
802.11 Authentication Mode as appropriate on the Advanced tab of this Profile Management
dialog.
To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode: