2 speedtouchtm610 remote access, Introduction, Resumé of speedtouchtm610 access methods – Technicolor - Thomson 610v User Manual
Page 9: Speedtouch, 2 speedtouch, 610 remote access
2 SpeedTouch
TM
610 Remote Access
Application Note Ed. 01
5
2 SpeedTouch
TM
610 Remote Access
Introduction
The application note SpeedTouch
TM
610 Operation and Maintenance described some of
the standard access methods the SpeedTouch
TM
610 provides to allow users to perform
configurations and/or - if needed- the required procedures for maintaining and opti-
mizing SpeedTouch
TM
610 operation and performance.
While that application note described what tools are provided by the
SpeedTouch
TM
610 and how to use them via the SpeedTouch
TM
610’s local interface(s)
(Ethernet and ATMF-25.6Mb/s), this section will describe how you can use the very
same tools via its DSL interface, i.e. from the remote side of the Packet service connec-
tion.
Resumé of
SpeedTouch
TM
610
access methods
Before going deeper into the specific changes needed to allow certain monitoring or
management, a listing of the methods to access the SpeedTouch
TM
610 is provided:
•
SpeedTouch
TM
610 web interface access (HTTP/HTML)
•
SpeedTouch
TM
610 CLI access (TCP/IP-Telnet)
•
SpeedTouch
TM
610 FTP access (TCP/IP-FTP).
Note
For more information on the SNTP, Syslog and SNMP management tools,
see the respective sections in this application note.