Teac CDX10I - Manual (Page 13)

13
Muting
To mute the sound temporarily, press the MUTING button.
Press the MUTING button again to restore the sound.
Headphones
For private listening, first reduce the volume level to
minimum. Then insert the plug from your headphones into
the PHONES jack, and adjust the volume using the VOLUME
buttons. The sound from the speakers is cut off while the
headphone jack is inserted.
CAUTION
Always lower the volume level prior to plugging in your
headphones. TO AVOID DAMAGING YOUR HEARING - Do
not place your headphones on your head until after you have
plugged them in.
Tone Control
< The MUTING indicator lights and the volume level blinks on
the display to indicate that the muting is engaged.
< If you change the volume or source during the muting, the
muting will be canceled.
SLEEP 90, 60 or 30:
The power will be switched off 90, 60 or 30 minutes later.
SLEEP 00:
The sleep timer is off.
< If you want to check the remaining time, press the SLEEP
button once. The remaining time will be displayed for a few
seconds.
Sleep Timer
You can set a sleep timer so the unit turns itself off after a
specified time.
Press the SLEEP button repeatedly until desired time appears
on the display.
1. Press the BASS or TREBLE button.
To adjust the level of low frequency sound range, press the
bass button.
To adjust the level of high frequency sound range, press the
treble button.
2. Within 5 seconds, press the VOLUME buttons to change
the setting.
The level can be adjusted from –5 to +5.