Transition Networks STACKMASTER TX12 - Manual (Page 8)

StackMaster™ TX12 10 5 100BASE-TX 12-Port Stackable Hub
Connecting Power to StackMaster TX12
To power ON the StackMaster TX12:
1. Locate the power receptacle on the back of the StackMaster
TX12.
2. Connect the StackMaster TX12 power connector end of the
power cord to the StackMaster TX12.
3. Connect the external power connector end of the power cord
to external AC power.
NOTE: After power is supplied to the StackMaster TX12, the green
Power LED is illuminated.
3. INSTALLATION
NOTE: StackMaster TX12 Link Integrity cannot be disabled. All devices
connected to the StackMaster TX12 MUST have link functions enabled.
To install the StackMaster TX12:
• Unpack the StackMaster TX12 Hub.
•
Install StackMaster TX12 on shelf or in rack
• Optionally cascade StackMaster TX12 hubs
• Connect 100BASE-TX cable to StackMaster TX12
• Connect the StackMaster TX12 to power.
Direction is provided in the pages that follow.
Unpacking the StackMaster TX12
The StackMaster TX12 packing contents should include the following:
Item Part Number
StackMaster TX12 SMHB-E-TX-12
Power Cord 3344, 3347, 3348, 3349, or 3523,
(depending upon power configuration
in country where installed)
SCSI Connector
User’s Guide
33010