Toshiba FIERY GA-1121 - Manual (Page 155)

7
7-5 Tracking and managing jobs with Fiery Spooler
Duplicate Job(s) Duplicate one or more selected PostScript or
PCL data jobs in the Spool or Print areas
(creates a reference to the original job, with
the same name). n/a
(Duplicate is not available for raster jobs.)
Rename Rename the job (PostScript or PCL file with
or without raster). Unaffected, but associated with the new
name
Hold Hold the job in the current place (except for
a printed job, which is moved to the Spool
or RIP area). Held in RIP area indefinitely, if included
with job
RIP and Hold RIP the job and hold it in the RIP area. Held in RIP area indefinitely
Print Print the job in its turn (RIP the job first if it
does not have raster data). Keep the printed
job in the Print area until the job limit is
reached. Temporarily held on the server until the job
has completed printing
Print and Hold
(like the PPD option
Save Fast Reprint) Print the job in its turn (RIP the job first if it
does not have raster data).
After printing, hold the PostScript or PCL
data and the raster in the RIP area. Held in the RIP area indefinitely (saved to
disk)
Process Next Give top priority to this job.
Print the job (or RIP and print) as soon as
the processor and copier/printer are free,
before other waiting jobs. Held in RAM after printing (can be selected
in the Print area while it remains there), or
held in RIP area (saved to disk) if
destination was RIP and Hold
Remove Raster Remove the raster from a job that has raster
data; leave the PostScript or PCL job in
place. Deleted
Override Print Settings Change the print options for the job
(see
page 7-6 ).
Deleted and regenerated, if the newly
selected options require reRIPping, or
reprinted with the new settings, if none
require reRIPping
Choose this command
from the Job menu
To do this Raster data is